Ampair 100 Wind Turbine
A complete wind turbine system for land or marine use

The Ampair 100 wind turbine has an unrivalled pedigree as the microwind turbine of choice for absolute reliability for charging battery systems in harsh conditions. Although it only generates up to 100 watts of electrical power in practice it often outperforms so-called 400 watt machines because of its very good low windspeed performance.

• Generates up to 100 watts for 12 volt or 24 volt battery systems.
• Designed to survive the severe marine environment.
• Heavy duty, all-weather generator, sealed to keep corrosion out.
• Permanent installation as a fit & forget unit.
• Found in many other applications such as weekend chalets, radio repeaters, navigation equipment or anywhere that requires 12v/24v battery charging.
• Save the cost of fuel and the need to run noisy engines. Reduce engine running under light loads · Supplement solar charger output with energy that is potentially available day and night; winter and summer.
• Improve battery condition and extend battery lifetime. Increase battery charging out of summer season when electrical demand increases but sunlight reduces.
• The Ampair 100 frequently produces in a day what an equivalent costing solar array would take a week to accumulate. The only penalty is the need to have a safe and secure mounting in as exposed a location as possible .... but just think of all that ENERGY

Materials, and low temperature operation
Excellent corrosion resistance is achieved by the exclusive use of aluminium alloy, stainless steel and plastic materials for all external parts, backed up by the comprehensive use of elastomer seals and topped off by a stoved white paint finish. Plastic materials do not perform well in extreme cold, becoming brittle and breaking. This applies to wind turbine blades, whether glass filled or not. Operation at around zero Centigrade should not be a problem, but most materials are vulnerable at -20C and cannot be warranted to survive. The Ampair 100 uses glass filled polypropylene blades, moulded with large sized fibres in a compression process, which are superior to nylon, carbon polymer or other plastics in this respect. However, when icing is also considered, the prediction of blade reliability is even more difficult. Other materials are also suspect. Examples are Nitrile used in exposed seals and 0-rings and basic PVC cable sheathing. For this reason Ampair uses Neoprene components where possible. Grease used in sealed bearings allows performance to -30C or below, but component tolerances (ball and ring) can lead to greater friction and increased wear causing reduced bearing life. If desired Ampair can quote for special components to operate in Arctic/Antarctic conditions.

Maintenance and recommended spares
The Ampair 100 is designed so that users can strip it down n the field and replace those components that wear out over time or that become damaged in accidents. In remote locations or on long sailing voyages accidental damage is always a possibility. We suggest that two spare wind turbine blades be carried. Other spares to consider are: Pivot Seal, Shaft Seal, Set of Brushes and Caps.

PDF Download
	Manual		76 KB
	CE Declaration		64 KB

Picture below: Ampair Pacific, Messtation Wasser- und Schifffahrtsamt Bremerhaven supplied by Solarlink GmbH

Onlineshop Ampair Pacific 12Volt Version, den Preis finden Sie im Shop  

Onlineshop Laderegler HRDX 12Volt Version, den Preis finden Sie im Shop  

Schnellsuche

Bei uns Zahlung schnell und sicher per