Description

A Controller for Virtually Any DC Charging Source

The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. All can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED.

All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.

Product Features

Ensures your batteries are always charged
Silent, pulse width modulated microprocessor control (maximizing battery life)
Field adjustable voltage and battery set points
Electronic protection against short-circuit, overload, over temperature and reverse polarity conditions.
Optional Accessories:

CM: Cumulative amp hour meter
CM/R: Remote cumulative amp hour meter (available in 50 or 100 foot lengths)
BTS: Battery Temperature Sensor

Features

The C Series offers three models, the C35, C40, and C60, that can handle 35,40, and 60 amps of DC current.
Silent, pulse width modulated (PWM), high efficiency operation.
Three-stage battery charging (bulk, absorption, and float).
Automatic overload protection in both active and passive modes.
PV array short circuit and reverse polarity protection.
Durable construction.
Backed by a two year warranty.
Microprocessor controlled.
As a Solar Charge Controller

When used as a solar charge controller, the C40 can control 12, 24, or 48 VDC array operation and the C35 and C60 can control 12 and 24 VDC array operation.
All units offer selectable settings for NiCad, flooded lead acid, gel, or absorbed glass mat batteries.
As a DC load controller

PDF Download
	Flyer		181 KB
	Manual		949 KB
	Digital Meter		952 KB

As a DC load controller, the C Series has a low voltage disconnect warning system and field adjustable set points that govern automatic low and high voltage disconnect.
Manual reset switch for emergency low voltage operation.
As a Diversion Load Controller

The C Series automatically directs extra power to a dedicated load such as an electric water heater and ensures batteries are never over-charged.
Options

Plug-in remote temperature sensor (BTS) for increased charging precision.
Cumulative amp-hour meter (CM) that can be installed on the face of the controller, or remotely (CM/R), up to 100 feet (30 m) away.

Modell	C 35	C 40	C 60
Voltage Configurations	12 bzw. 24 V DC	12, 24 und 48 V DC	12 bzw. 24 V DC
Max. PV Open Circuit Array Voltage	55 V DC	125 V DC	55 V DC
Charging / Load Current (at 25 °C)	35Amp. DC	40Amp. DC	60Amp. DC
Max. Peak current	85 Amp. DC
Max. Voltage Drop through Controller	0,30 Volt
Typical Operating Consumption	15 mA
Typical Idle Consumption	3 mA
Recommended Breaker Size	45 Amp.	50 Amp.	60 Amp.
Load Control Mode	Low Voltage Reconnect - Adjustable (sticker provided with unit) all models Low Voltage Disconnect - User selectable manual or automatic reconnection - includes warning flash before disconnect and provides a one time, user selectable grace period) all models
Enclosure Type	Indoor, ventilated, powder coated steel with 3/4" and 1" knockouts
Unit Weight	1,2 kg	1,4kg
Dimensions (H x W x D)	20,3x12,7x6,4cm	25,4x12,7x6,35cm
Mounting	Vertical wall mount - indoor only
Lastwiderstände	je nach gewünschter Leistung in verschiedenen Ausführungen lieferbar, z.B. für Windgeneratoren bis 350 Wp 100,53 €
Features & Options	Battery Temperature Sensor BTS - optional remote battery temperature sensor for increased charging precision		Display see below
Zertifikate	EN50081-1, EN50082-1, EN60335-1, EN60335-2-29
zum Onlineshop, Preise finden Sie im Shop

CM & CM/R
Designed for use with C Series Charge Controllers, this digital meter mounts displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application

Description

Designed for use with C Series Charge Controllers, this digital meter mounts onto the front of a charge controller, or as a remote, it can be installed up to 100’ (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50’ (15 m) or 100’ (31 m) communication cable for remote installation.

Schnellsuche

Bei uns Zahlung schnell und sicher per